Cookie Img
Back to top
Send SMS    Call Me Free Offline Send Inquiry
Trust Stamp
Home » Services » Automotive Testing Laboratory » Automotive Testing Laboratory

Automotive Testing Laboratory

Automotive Testing Laboratory
Automotive Testing Laboratory
Service Code : ATL - 66

Automotive Testing Laboratory

Engine Parts

Testing Parameter:

  1. Chemical Analysis

  2. Hardness Tests

  3. Microstructure Analysis

  4. Impact Testing

  5. Sulphur printing

  6. Radiographic Testing

  7. Mechanical Testing

  8. Decarburization depth

  9. Iron Castings Tests

  10. Failure Analysis

  11. Fracto graphy using Scanning Electron Analysis

  12. Grain size determination using X-ray Diffraction

  13. Salt spray tests

Transmission Parts

Testing Parameter:

  1. Chemical Analysis

  2. Tensile Testing

  3. Mechanical Testing, Microstructures

  4. Case depth determination

  5. Micro hardness testing

  6. Sulphur printing

  7. Macrostructure Testing

  8. Dye Penetrant Testing

  9. Pressure testing

  10. Radiography

  11. Corrosion testing, Mineral Analysis

  12. Prototyping of heat treatment processes

Auto Body Parts

Testing Parameter:

  1. Coating thickness measurement by chemical analysis & by Microsection method

  2. Mechanical Testing

  3. Chemical Analysis

  4. Eddy current testing

  5. Ultrasonic testing

  6. Bend testing

  7. Ericksen Cupping test

  8. Magnaflux testing

  9. Low alloy steel testing

  10. Auto Steel Bars

  11. Atomic Absorption Spectroscopy

  12. Coating Thickness meters

  13. Reverse Engineering of Chemistry and Mechanical properties for unknown compositions

Chassis Parts

Testing Parameter:

  1. Coating thickness measurement by chemical analysis & by microsection method

  2. Mechanical Testing

  3. Chemical Analysis

  4. Eddy current testing

  5. Ultrasonic testing

  6. Bend testing

  7. Ericksen Cupping test

  8. Magnaflux testing

  9. Steel sheet testing

  10. Steel Castings

  11. Copper Sand Castings

  12. Magnesium Alloys

  13. Aluminum Castings

  14. Die Casting parts

  15. Fasteners

  16. Washers

  17. Tubes

  18. Spring steel wire

  19. Axle steel bars

  20. Atomic Absorption Spectroscopy

  21. Coating Thickness meters

Plastic Components

Testing Parameter:

  1. Tensile Testing

  2. Flexural test

  3. Hardness

  4. Impact Tests

  5. Heat Aging

  6. Environmental Stress Cracking

  7. Specific Gravity

  8. Water Absorption

  9. Water Vapour Transmission

  10. Optical properties

  11. Hazardous materials - Lead, Mercury, Cadmium etc

  12. Weathering Studies testing UV and Xenon arc  Weathero meter exposure to various intensities of radiation, Temperature cycles and Condensation cycles.

  13. Flammability of Plastic parts, Textiles, Films and Foam by ASTM and UL standards and various automobile standards

  14. Fogging Test for Interior automotive materials

  15. Minimum oxygen concentration for combustion

  16. Thermal Conductivity by guarded hot plate method

Coatings

Testing Parameter:

  1. VOC (Volatile Organic Compound)

  2. Measurement of Gloss by goniophotometry

  3. Viscosity of Paints and Related materials

  4. Coating thickness

  5. Salt spray test

  6. Xenon arc exposure of paint

  7. Weathering studies on colour, reflectance etc

Flexible Cellular Parts

Testing Parameter:

  1. Indentation hardness Index

  2. Compressive strength

  3. Tensile Strength

  4. Compression Set

  5. Humid and heat Age resistance

  6. Dynamic fatigue resistance

  7. Flammability

Rubber Components

Testing Parameter:

  1. Tensile Testing

  2. Tear Resistance

  3. Hardness

  4. Compression Set

  5. Heat Aging in air

  6. Specific gravity

  7. Abrasion Resistance

  8. Tensile Strength and Elongation of V-belts

  9. Effect of liquids (Various automobile fuels, lubricating oils, and coolants. Change in physical properties and volume can be studied)

  10. Deterioration-Surface Ozone Cracking in a Chamber

  11. Rubber Property-Adhesion to Rigid and flexible Substrates

  12. Hose (for air/vacuum brakes) testing

  13. Rubber crack growth  De Mattia Flexing

  14. Brittleness temperature by Impact

  15. Cut growth resistance

  16. Liner and cover adhesion of reinforced hose

  17. Oil resistance of hose

  18. Stress Relaxation tests


 


J. K. ANALYTICAL LABORATORY & RESEARCH CENTRE

Contact Us

( *represents compulsory fields )

Tips on getting accurate quotes. Please include product name, order quantity, usage, special requests if any in your inquiry.



We Provide Our Testing Services in India, Africa, USA, and Canada.